12/28/2023 0 Comments Bluecore csra64215 usb audio![]() After reading is completed, "Write Device" will become clickable, and the parameter options on the left will also become editable. The "Read Device" button will becomes clickable In configuration mode, and then click it. Select USB SPI in the drop-down menu, and then click "Go Configurable" to enter the configuration mode. Make sure the hardware connection is good, then open ADK Configuration Tool in ADK_QCC300x.WIN.1.0.167. Same operation procedure as the old module. Use PSTOOL can change the Bluetooth name. Then the blue led and red led will flashe alternately. ![]() Make sure the first 6 pins have a good contact with the corresponding pads. You need to locate the single steel alignment pin of the connector into the single hole of the PCB footprint, then press down softly to engage the spring-pin contacts. This is a tutorial of how to configure the QCC300x(QCC3005,QCC3007,QCC3008) series Bluetooth.ĭownload ADK_QCC300x.WIN.1.0.167 and install itĬonnect the CSR USB-SPI programmer and Tag-Connect line with a AudioB Plus convert board, then connect CSR USB-SPI to your computer by a mini USB cable and windows will auto detect it and install the drivers.Ĭonnect TC2050-IDC-NL’s connector to AudioB plus programming port. The chip configuration procedure have some difference compare to the CSR64215. Now, we have upgraded our APTX series amplifier to the newest Bluetooth 5.0 chip QCC3008. The old bluetooth chip CSR64215 are discontinued.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |